Image 01 Image 02 Image 03 Image 04
 
Contact Us Follow Us on Facebook Follow Us on Twitter € Euros    |     Ex VAT Pricing     |     Register     |     Login
 
 
Freephone: 0800 318192 
Freefax: 0800 0272833 
£0.00
 
Home > Re-inkGuide
Re-Inking Stampers

All our ranges of pre-inked stampers can be re-inked using the appropriate refresher ink. For the Superstamper and Stamp Stack range use only the SS Ink. For the ES Range, Clix and Stick Stars use the ES Ink. GOLD and YELLOW ink are not available for re-inking!

SS Range  
  1. To re-ink your SS stamper turn it upside down.
  2. Add 2 - 3 drops of refresher ink directly onto the rubber pad. Do not over ink as this will decrease the quality of the image being stamped.
  3. Leave the stamper in this position for a few hours (overnight is ideal).
  4. Start stamping again!
SS re-ink graphic
ES Range  
  1. To re-ink your ES stamper Remove the handle (holding the base and the handle - it will pull apart).
  2. Set the stamper down on a level surface (put a sheet of paper underneath so that you do not mark the surface it's sitting on).
  3. Add 2 - 3 drops of refresher ink to the small well facing upwards. Do not over ink as this will decrease the quality of the image being stamped.
  4. Leave the stamper in this upright position for a few hours (overnight is ideal).
  5. Put the handle back on the stamper again.
  6. Start stamping again!
ES re-ink graphic
Stamp Stacks
  1. To re-ink your Stamp Stack stamper turn it upside down.
  2. Add 2 - 3 drops of refresher ink directly onto the rubber pad. Do not over ink as this will decrease the quality of the image being stamped.
  3. Leave the stamper in this position for a few hours (overnight is ideal).
  4. Start stamping again!

 

 ES re-ink graphic
Clix
  1. To re-ink your Clix Stamper Pen, remove the stamper from the end of the pen ( it will pull apart).
  2. Set the stamper down on a level surface (put a sheet of paper underneath so that you do not mark the surface it's sitting on).
  3. Add 1 - 2 drops of refresher ink to the small well facing upwards. Do not over ink as this will decrease the quality of the image being stamped.
  4. Leave the stamper in this upright position for a few hours (overnight is ideal).
  5. Put the stamper back on the pen.
  6. Start stamping again!
 Clix re-ink graphic
Stick Star
  
  1. To re-ink your Stick Star Stamper, remove the stamper from the end of the pen ( it will pull apart).
  2. Set the stamper down on a level surface (put a sheet of paper underneath so that you do not mark the surface it's sitting on).
  3. Add 1 - 2 drops of refresher ink to the small well facing upwards. Do not over ink as this will decrease the quality of the image being stamped.
  4. Leave the stamper in this upright position for a few hours (overnight is ideal).
  5. Put the stamper back on the barrel.
  6. Start stamping again!

Stick Star re-ink graphic
 

Home | About Us | Contact Us | Customer Services | Sign Up to Offers | Register | View Basket
 Please Login Close
EMail
Password
Forgotten your password?
Not Registered?
Cancel
Login
OK
Previous Basket Still Available Close
You previously had a basket that was not completed as an order.

Do you wish to continue with this basket or cancel it and start with an empty basket?
Cancel
Continue
Last item added to Basket




Qty = 0
 0 items
View Basket
 SubTotal =


To view your Bonus Points balance you need to be logged in to your account.

Bonus Points are earned on all your online purchases.

You can then use your Bonus Points as a discount off future orders. Just enter the number you wish to use in the Basket when you are checking out.